Belt Conveyor


1.The transport of materials caused by impurities within the belt tear. Infusion of impurities within the material for the coal port, the most quality of coal isn’t smart, coal within the giant coal and varied impurities, like iron, sticks, etc., concerning 70-80% of the tear, therefore making certain the supply of coal Quality is that the key to ripping.
2. Belt conveyor electronic equipment put in properly caused by the belt tear. Belt conveyor electronic equipment, liner drop, the iron connected to the sharp iron, the installation of improper cleanup and then on could cause tearing and scraping of the conveyor, normal conveyor while not horizontal protection structure, cannot stop tearing.
3. Belt conveyor structure isn’t excellent to cause the belt tear. as a result of the structure of the belt conveyor isn’t excellent, the transference purpose of the conveyor is giant, the impurity within the coal flow is comparatively giant, the impact force is giant, the sharp and therefore the arduous long impurity is straightforward to insert into the conveyor conveyor tear.
4. obstruction material caused by the conveyor tear. Transfer chute little, straightforward to dam the fabric and impurities through the explanation for conveyor tear.
5. The conveyor deviation caused by propulsion edge.
6. come back with roll coal and then on.
additionally, the conveyor facet of the aging of the conveyor core layer of water, inflicting the rope out of corrosion, may also cause tear.
All the conveyor should be ring into the utilization, therefore the conveyor joints directly have an effect on the service lifetime of the conveyor and conveyor line will run swimmingly and swimmingly. General conveyor joints usually used strategies square measure mechanical joints, cold bonding joints, heat set joints.