For the mining belt conveyor equipment business is the key to marketing, to find in addition to their own local old-fashioned marketing concept, have to find a unique innovative marketing innovation. Especially for many small and medium conveyor equipment enterprises, the lack of strong backing of independent research and development, in many technical aspects of competitiveness than foreign enterprises. So, for the enterprise development technology is fundamental, from the conveyor equipment manufacturers must be in product research and development under the hard work, and more people to absorb the advanced concepts and technology. Will be the combination of the two, and constantly improve the weakness of the self, which the global market differentiation needs, to achieve leapfrog development.Among them, the mining belt conveyor equipment is mainly used for the bulk material handling of port terminals. It is also frequently used in large-scale new construction plants in the near future. Compared with other conveyors, the mining belt conveyor equipment has a large amount of power consumption and small operation. Smooth and reliable and easy to use in combination.
The conveyor belt is both a traction mechanism and a carrier mechanism in the mining belt conveyor equipment. It should not only have sufficient strength, but also have the corresponding bearing system. The drive system is the core component of the belt conveyor. Reasonable selection of the driving method can improve the transmission performance of the conveyor. According to the working environment, the drive unit is driven by an asynchronous motor with a torque limiting type fluid coupling and a speed reducer. The motor is connected to the fluid coupling and then connected to the reducer. The output shaft of the reducer is connected to the drive roller through the coupling. The entire transmission is arranged in parallel with the conveyor, and is equipped with a disc brake and a backstop to ensure the safety of the mining belt conveyor equipment. Brake and prevent reversal.This leads to an increase in equipment wear and power consumption.Overcoming the shortcomings of the existing idler technology, a single dumbbell-type integrated structure of the idler roller is provided, which avoids the friction of the belt and the idler caused by the long and complicated death of the conventional composite structure roller.
To adjust the drive pulley and reoriented pulley position to drive the drum and adjust the drum adjustment is an important part of the belt deviation adjustment. Because the mining belt conveyor equipment has at least two to five rollers, all drums must be mounted vertically to the belt conveyor. The length of the center line, if the skew is too large inevitable deviation. The adjustment method is similar to adjusting the roller group. For the head roller, such as the belt to the right side of the drum deviation, the right side of the bearing seat should move forward, the belt to the left side of the roller deviation, the left side of the bearing should move forward, the corresponding can also Move the left side bearing seat back or the right side bearing seat backwards. The tail roller is adjusted in the opposite direction to the head roller. After repeated adjustments until the belt transferred to the ideal location. It is advisable to install the position correctly before adjusting or reversing the drum.